Hi-Vz 10 oz ‹ ITI Fabrics

Hi-Vz 10 oz

A patented Modacrylic/Cotton/Polyester blend, Napped Fleece fabric that meets the specific high visibility aspects of ANSI/ISEA-107 2010, the flame resistant requirements of ASTM F-1506, has been arc rated to ASTM F-1959, and is rated according to NFPA 70E as a level 2 fabric.
10 oz sq yd and is available opened at 58-60” cuttable width.

Available in high visibility yellow.

The arc performance value is 19.7 and the fabric meets the requirements of ANSI/ISEA 107-2010, NFPA 70E level 2 and ASTM 1506 for FR and other performance measures.

View ANSI/ISAE 107-2010 Reflective Tape

Calendar
September 2010

M T W T F S S

« May

1 2 3 4 5

6 7 8 9 10 11 12

13 14 15 16 17 18 19

20 21 22 23 24 25 26

27 28 29 30

ANSI/ISEA 107-2010: American National Standard for High-Visibility Safety Apparel

ANSI approved the ISEA revision of the 107 Standard on high visibility apparel. The 2010 revision includes the addition of testing and labeling requirements for garments marketed as “FR.” Under the new standard, any garment labeled FR must comply with at least one of seven commonly accepted FR standards. These FR standards, independent of ANSI 107, are published by either ASTM or NFPA. To comply with ANSI 107-2010, FR garments must now be specially labeled in one of two ways. · For garments tested to an ASTM FR standard, the letters “FR” followed by the specific ASTM standard must appear on the garment’s interior label. · For garments tested to an NFPA standard, a separate label indicating certification must be attached to the garment.